§ 5-6-125. Active system requirements.

(a)

Grease recovery devices. Grease recovery devices shall be permitted in lieu of grease interceptors or grease traps in accordance with the following requirements:

(1)

Location. Grease recovery devices shall receive all grease laden waste discharge from the major point sources. A floor drain shall not be considered a major point source.

(2)

Sizing. Grease recovery devices shall be sized based upon the anticipated load and/or conditions of actual use.

(3)

Capacity. Grease recovery devices shall have a minimum retention capacity as indicated in Table 1 set forth in 5-6-124(d) for the flow-rates indicated. (Ord. No. 4501, 10/13/07, Sec. 1)